Project Description
The weight of the Machine: 6.0T
The total dimension of machine: (length)8.0m x (width)1.4m x (height)1.6m
1) Decoiler
- Tightening of coil: By Manual
- Weight capacity of decoiler: 5.0T
- Inner diameter of decoiler: 380-550mm
- Max outer diameter of decoiler: 1600mm
2) Feeding and Leveling Device
- It used for making the material flat before feeding into the roll forming machine
- 11 rollers (five upper and six lower)
3) Rolling Forming System
- main motor type: frequency motor
- motor power: 15KW
- Drive: chain
- speed of forming: 8-15m/min
- material of roller: Cr12
- Motor for width adjusting: 2.25 KW (0.75KW*3)
- 16 groups rollers
- material of main shaft: 40Cr (The main shaft have the high frequency grinding & heat Treatment and the surface of
- shaft is chroming
- diameter of main shaft: ø75-89mm
Machine Components
a) Manual Decoiler 1 set
b) Feeding and Leveling Device 1 set
c) Hydraulic punching and cutting 1 set
d) Rolling forming machine 1 set
e) Post cutting 1 set
f) Product support frame 1 set
g) PLC control system 1 set
Download .PDF